Auto Folder Gluer Machine With Adjustment
Auto Folder Gluer Machine With Adjustment
Adjustment instructions: According to size and position of the cardboard, adjust the left and right positions of the glue box to match the glue position of the cardboard.
According to the thickness of the cardboard, adjust (1) ,so that the cardboard is in contact with the bottom coating wheel. Base on needs,adjust (3) to control the glue amount. Observe (4) the glue position in time,(2) the diaphragm pump automatically circulates the glue.
4. Conveyor Belt Adjustment:
1) Adjust the belt gap
ment instructions:According to the thickness of cardboard, The gap between the two belts here can be adjusted height of the upper pressing wheel
When there is no paper feeding, according to the situation .The gap can be adjusted appropriately. If it is caused by the low pressure of the middle pressing roller, the U-shaped pressing belt can be adjusted Set the studs and adjust the appropriate pressure. When misfeeding occurs, it can be adjusted appropriately according to the situation. Tighten the side or tighten the loose side. The overall gap should not be too tight and balanced to.
(2) Adjust the tightness of the conveyor belt
Adjustment instructions: Because this belt is too long, it is inevitable that the belt will elongate during use. We need to pay attention When adjusting this position, keep the belt tension moderate, otherwise it will cause paper feeding failure, or even broken tape. Properly adjust the cardboard guide tube to make the transmission stable, smooth and reasonable.
Product Tags:
|
|
380v 220v Auto Folder Gluer Machine With Adjustment Images
|
